Step 3: Remove all bolts that attach power steering hose to valve cover using 10mm socket.
Step 4: Remove spark plug cover using 10mm socket.
Tip: Be gentle these bolts break easily
Step 5: Remove 6 bolts that hold on valve cover using 10mm socket.
Step 6: Remove the four bolts that holds the spark plug cables.
Step 7: Remove valve cover.
Step 8: Remove gasket seal from stock valve cover and install it on JDM valve cover, or replace it with a new gasket from honda.
Step 9: Install new valve cover and install bolts and hoses using the reverse order above (step 6 to step 1). I USED HONDA BOND ON EVERY 90 DEGREE ANGLE ON THE VALVE COVER,ALSO I USED A TORQUE WRENCH AT 7.2lbs ON THE BOLTS