Acura RSX Type S K20 Oil Pump Install on K24 Block

Simple Tips on How to install an Acura RSX Type S K20 Oil Pump on a K24 Block. this video explains the removal and install procedure as well as providing tips to make the job easier.

This is the video If you are interested in Honda K-Series engines K20 K24. SUBSCRIBE HERE - http://DMAutoPartsNY.com/youtube

Here is the PARTS LIST for How to install an Acura RSX Type S K20 Oil Pump on a K24 Block for Honda K-Series engines

►RSX Type S (K20A2) Oil Pump Assembly #15100-PRB-A01
►RSX Type S (K20A2)Windage Tray #11221-PNC-000
►RSX Type S (K20A2) Oil Pump Chain #13441-PCX-004
►RSX Type S (K20A2) Oil Pump Chain Guide #13460-PNC-004
►RSX Type S (K20A2) Oil Pump Chain Tensioner #13450-RAA-A02
►Oil Pumps Bolts (one of each) #95701-06025-08 #95701-08050-08 #95701-08075-08
►Windage Tray Bolts (6) # 5701-06014-08
***Bolt and washer to plug oil jet on the block***
►CRV (K24A1) Block can use Oem Honda Part #90004-PE2-005
►K24a2 or K24a4 will need a M8 x 1.25 1” inch bolt and washer ***BE SURE TO USE HONDABOND TO KEEP THE BOLT FROM FALLING OUT
 
*** Here are some tips for the RSX Type S Oil Pump conversion This oil pump is found on the DC5 Type R K20A, RSX-S K20A2/Z1.

If you using the RSX Type-S oil pump and are using a TSX (K24a2) or Accord block (K24A4), you will need to modify the mounting surface of the pump to accommodate the lump in the lower plate.
 
The CRV (K24a1) block you do NOT have to modify the pump. It's a flat surface. You can reuse the oil chain tensioner from your K24A Engine.

The oil pump tensioner from the K24A is the only part that is the same as the RSX. If you have an 8th gen SI K20Z3 you will need to modify your exsisting tensioner or add the RSX oil pump chain tensioner.

The K20Z3 tensioner is the only US spec K20 engine that does not have the RAA
piece

.